get paid 3% daily up to 150% for 50 days. no sponsoring requirements. earn upto $10,000 /position get paid 3% daily up to 150% for 50 days. no sponsoring requirements. earn upto $10,000 /position get paid 3% daily up to 150% for 50 days. no sponsoring requirements. earn upto $10,000 /position

Friday, 4 November 2011

The Xbox Red Ring of Death Fix- Troubleshooting Information

By Tom Andrews


The Xbox 360 console is a gaming system created by Microsoft to compete with the Sony PlayStation. Like any modern day device, the Xbox is plagued with its share of design flaws. The most popular issue is the "ring of death". However, it is not as bad as it sounds. The Xbox red ring of death fix will only take around an hour or so.

The Xbox 360 is essentially a computer specifically made for gaming. The components are crammed into a very small space where there is barely any room for proper ventilation. The GPU and processor can generate a great deal of heat when used for long periods of time and this can damage other components. With this, an Xbox red ring of death fix is needed.

The best thing about the Xbox 360 is that it tells you what the problem is. The 4 lights surrounding the power button is commonly referred to as rings and these greatly help diagnose the problem. If three of the rings light up, then your unit has the infamous ring of death. However, by following the steps in the Xbox red ring of death fix you will be able to repair your console in no time.

Once you checked the lights and it shows up as the ring of death, make sure to double check the external components as well. First off, check the wires and see if it has any cuts or physical damage that might affects its performance. Aside from the wires, you can also directly plug in the Xbox 360 directly to the wall. In addition, also make sure to try plugging in the device to different wall outlets just to make sure.

Ring of death fix also recommends checking the power brick. If your power brick is malfunctioning, it may cause the error in the event that cannot meet the power requirements of the machine to function properly. At all cost avoid placing the power brick on any fabric like surfaces. This can lead to overheating. Ventilation is very important and placing it on something that help dissipated heat will really help.

Also, check if there is any blockage in the ventilation openings or holes. If you have had your Xbox for a long time, dust can block the vents. Just blow off any dust ventilation holes. This will work for both the console and the power brick. If you know anyone who has an Xbox 360, test your console on a different power brick.

Opening the console can void your warranty. If it still covered within the warranty period, then contact Microsoft. In addition, if you are uncomfortable opening it up, it's recommended to send the machine to Microsoft given that it is still within warranty period. However, getting it repaired will take some time.

Before opening anything up, make sure to troubleshoot the hard drive located at the top section of the console. Dust might have buildup and are blocking the contact points of the hard drive. Clean it every now and then is recommended.

Once all the easy to reach components have been thoroughly checked everything and the ring of death error is still there, then that's the time to check the components inside the console. The Xbox red ring of death fix will involve cleaning components that produce lots of heat and replacing the thermal compound or paste applied to heat sinks, specifically the ones for the processor and GPU. The best thermal compounds are the ones specifically intended for performance desktop computers.




About the Author:



No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...